AquaChek Salt Test Strips

Pack of 10 strips. Each strip tests salt as Sodium Chloride.

It's simple....just fill a small vial with a sample of your pool water. Place a strip into the water until the yellow band at the top of the strip turns dark - typically in 3 to 4 minutes.

Then compare the results on the strip to the number scale on the AquaCheck label to determine the salt concentration.

In just minutes AquaChek White titrators measure salt (sodium chloride) levels from 400 to 7,000 ppm.   With appropriate salt levels, you can rest assured that your salt generator will be able to produce the correct amount of chlorine to keep water clean and free of contaminants.

For a clean and healthy pool, test the water at each end a minimum of twice a week!

Office hours: 9am - 5pm Mon-Fri. 9am - 3pm Sat. & Sun. 

Ph: 61 2 4956 5694

Email: sales@directpoolsupplies.com.au

Skype: directpoolsupplies